Відео

@@sahilmansoori3511 it has the bn220 in it.

@@sahilmansoori3511 my yo to GPS tracking s the BN220

Yes that’s right I forgot about that page. I can open it but won’t let me download anything for some reason. I have tried everything on my devices to download but I have but never been able to download anything. So I’m not sure what’s going on there.

know

@@PiDsPagePrototypes I think the FC would work well on most planes but if going larger wingspan I would only recommend the 1s lite for tight builds like the drift. I would suggest the moonlight camera , avatar gt longer range or v2 pro best cameras although most expensive than the 1s lite.

@@stonesrcchannel The Opterra does have enough room for the larger version of the SpeedyBee F405 Wing, the Moonlight kit is on my list - I absolutely want clean onboard 4K recording to SD card. I have HD02's already, and the Walksnail VRx will clip on those, I don't need the high frame rate for what I want, duration and a quiet prop are more useful for me. Looks like a lot of retailers don't have the VRx + Moonlight kit in stock at the moment, but do have the VRx + 1s Lite, so I might end up with the 1s in the nose, and a Moonlight in a belly-turret style gimbal housing. Do you know if there a way to set one of the spare switches on the controller to adjust the video transmitters output level? 25mW is perfect for the local club flights, but there's some areas where the signal drops out, and it'd be great to be able to flick a switch and get higher power when needed.

@@PiDsPagePrototypes I have thought about that exact same setup for the VTX power but have not found anything just yet that suggests it can be done just yet. I don't see why it can't be setup to a switch or even set as dynamic power, a bit like elrs dynamic power works, that would be great.

@@PiDsPagePrototypes I have heard this too although when I check the CG it definitely flies best a little nose heavy indeed.

@@QuadographyAustralia1965 it's tight but works well. Thanks for watching ,👍

The Kopilot just fits, works as advertised. BNF version inc camera is good 'My First Wing'

@@meareAaron Are you holding in the boot button on the USB extender while connecting it? If you are it sounds like a driver issue. Download the latest STM driver and see if it fixes it.

@@stonesrcchannel yep i was holding it before connecting usb but all it would do was just change to a different wireless mode and the led changes colors instead of connecting to inav thanks ill try the stm driver when i do find it

@@meareAaron or try using “impulse rc driver fixer” that has helped me quite a few times to get them into dfu mode to flash.

finally got it working turns out the jst wire connecting the buzzer and usb to the main board was not fully seated🤦

@@meareAaron damn such a pain when something so simple is the cause, I’ve been there and done that lol. I’m glad to hear you have it sorted.

@@GhostRyderFPV I plan to get the new Avatar Gt and set up a gm3 gimbal on a long range build. The head tracking is what I'm really keen to get into with these. Cheers happy flying

@@sarangmix397 thanks bro they are a cool goggle for flying with

Hi thanks for the video editing tip much appreciated as it is something i really enjoy doing for this channel and our family you tube channel "The Stones Life". I love to hear tips and ways to improve videos especially over on my other channel as i try to put more effort into those videos for our family history please check those out if you can.I would be happy to hear of ways to improve for sure.

@@stonesrcchannel Sure, I sent you a.mail.. kindly have a look

@@Biscuit_The_Crazy to unlock the extra power just go to caddx download centre on their website and download the FCC Unlock Procedure unzip the package and read the note on how to install it. You will unlock 1000 and 1200mhz plus 8 channels.

I will have a video on this soon but it’s pretty self explanatory once to unzip it and read the “read me” file.

@@stonesrcchannel ok thankyou 🙏🏻🙏🏻🙏🏻

@@m14srv yes indeed!

@@Gowieee cheers mate thank for the comment. I'm currently looking at the true RC X2 patches for it. I will retest when I get them to show the difference.

@@stonesrcchannel that’ll be interesting for sure. We need more Goggle X content. I see Caddx have “solved” all issues in their most recent post. I wonder what that will look like.

@@Gowieee also I'm keen to get this new Avatar gt 2watts VTX they just released.

Awesome thanks for your input that’s great to hear. I’m certainly going to upgrade the RX antennas soon, then I will do another test.

I have a couple of True RC X2 aerials coming I heard they go into the bottom connectors? I’m not sure regarding the retransmits though as to which one that is. I should use another patch antenna on this one to? Thanks for the help.

@@stonesrcchannel on the goggle x the transmit antenna is top left (on your head for reference). Both WS and DJI will ask to have packets retransmitted if the packet is lost or interrupted. If you only use an omni and are try to fly far your re-trasmit antenna will limit you if it needs to ask to rebroad cast packets. A patch that focus the signal will be helpful. Mad's vid explains some of this ua-cam.com/video/8Wa_XjQBKqs/v-deo.html

@ShermanKenB awesome thanks for the help

Hi and thanks for the comment, I do hope once i upgrade the aerials it will improve considerably although i can't see it being as good as my 1.3g systems. I did originally buy the GoggleX for the analog and to keep the long range 1.3g setup, but now flying HD, i think all my planes will be eventually upgraded to HD.

@@stonesrcchannel Hmmm, I was going to purchase the exact same camera/VTX combo that you're using, but now I'll just get the goggles and wait for the new range to be released in a couple of months. It's supposed to have 4 times the range, but we are at the pre-product release hype stage so we'll see how that all goes when released. Thanks again, you really helped me with my purchase decision.

@@FixedWing Oh thats good to hear i haven't heard anything regarding range increase as yet so fingers crossed for that. I feel the walksnail system has heaps to improve i hope they keep going the way they have been so far although i it has been a shame they seemed to release the goggle x a bit soon which is why they have copped a bit of bad reports. In saying that i have had nothing to complain about i ungraded the heatsink and run the latest firmware and everything works well. Like i said in the video my only disappointment is the range but i'm sure that will improve as i upgrade the aerials and better products are released in the future.

By the way i have just tested a long range analog vtx from AKK Tech which was sent to me. Its the alpha 10 watt vtx and i just did a range test with that on stock aerials it reach 8.3km with no drop out, unreal vtx shame its not HD. I did a review on it a few videos ago.

Some wind when the plane shakes

Yes bro its a good plane and even better now it has HD camera. The new camera makes it much clearer to fly with.

I was surprised it did 155 kph

I’ve had 211mph out mine. It’s on my channel. 6s lipo

I also do a vertical launch. Directly strait up. 👊🏻

@@ttucker2073 wow that's amazing

Yes I now have it setup on 3s. Seemed a little unclear to me regarding the v1 and v2 as It seemed the v2 could run more than 5v but to avoid risking it I set it up on 5v to begin with which I have now changed. Thanks for confirming!

my 2nd flite she caught fire on 3s

It does overheat if left too long without airflow but once in the air it’s fine. I have flown many flights 20-30 mins without any issues so far. I was thinking overheating issues would be a thing during the build but so far have had none.

I have never had that problem before, sounds like it could be a driver issue or a bad USB cable. I believe if you try install firmware via WiFi as well it won't work. Have you got the latest STM driver installed? Are you using inav?

Sounds like your not holding down the boot button on the extender when connecting the USB cable to the PC. If you are then it could be missing the latest STM driver.

In that part of the video I never mentioned holding the boot button on the USB extender so that may be your problem. The manual says to hold it down when connecting to PC. Hopefully that solves your problem

@@stonesrcchannel correct! It was lacking dfu driver. thank you for replying stonesRC!

@@sahilmansoori3511 great to hear glad that you have it sorted out. Hopefully it’s a great flight controller for you as it has been for me. Any issue please ask I’ll do my best to help out. Happy flying!

Cheers thanks.

Pretty much! 😁

Sorry for the late response my auto launch is pretty much default other than the spin up time being raised a little.

I haven't been able to as yet due to weather but I hope to have a video of it in use next week as our weather improves.

Have you tried a different cable? some USB cables they will not accept. I had the same issue for a while until I tried a different cable. It has to be a data cable. Also try powering up the craft via battery see if that helps.

@@stonesrcchannelHi, thank you for your answer, finally after hours of trying I found out that I need to update the driver, after that I was able to flash the controller, thank you and have a nice day

@@carlboulianne4284 I’m glad that you worked it out! Happy flying!

@@carlboulianne4284 hello what driver did you update? still cant update mine because it shows up as failed to restart in device manager

Awesome thanks for the tips. I'll probably look at getting a better strap. Analog probably would end up a waste I find it hard to fly with my old analog systems now. Probably end up converting all my craft to hd eventually.

@ 12:31

Not sure I got the music from you tube that’s all I remember.

Which would you recommend ?

I am not sure but I would think so somewhere in cli best advise is to try ask the iNav developers on Facebook they are very helpful!.

Thankyou I’m glad you found it helpful. Good luck with your build!

Sorry I don't have the tools to do that. On their website they do have a few images you can look at. Once I get one Installed to a plane I'll do some flight testing with it and see how it goes.

Yes you should be able to

Do you know what antenna I would use on the flight controller I'm so confused

@@ramonmejias2178 you would need a receiver compatible with the futaba 16iz although I haven’t looked at that transmitter before but I assume there would be compatible receivers you can get which support at least sbus on their website. If the 16iz has a module bay at the back you could get a module which supports Express LRS which would be the way I would set it up.

The receiver/RX which has the antenna plugs into the flight controller. The flight controller doesn’t have an antenna if that’s what’s confusing you.

Thank you so much if you are ever in ny you have an open invitation to fly in our club seaview rotary wings

Thanks much appreciated

Thanks for the comment much appreciated. Sounds odd have you calibrated the esc? Sounds like the motor is fine as you have tried other motors problem may be with the esc. Just to note in this video i did have the 5v cable on the esc bec connected by mistake should only have signal and neg wire only as it can cause issues. Other than that it seems unusual but i would try look at changing esc to see if it helps.

Have exactly same issues Motor and servo dont works ! CRSF bind, esc beep constantly :(

Yeah totally surprised me how well it flies especially with the hi system and its overall weight on the heavy side. It may end up being my go to plane for everyday flying as it’s so portable.

TBH I agree the fisheye does bother me a bit too it's a shame it can't be compensated for in the Goggle X menu somehow to remove it.